*NEW* ECH Series FRP Corrosion Free Multi Cartridge Housings

{mosimage}

Pre-filtration is one of the most important stages of any system installation. Hydropure makes the pre-filtration process simple and easy by providing a range of pre-filter housings to suit almost any requirements. Our new FRP Epoxy Filament wound upright, Multi Element Filter Housings, are one of the most effective ways to solve the problem of system pre-filtration with saline or corrosive fluids. The housings have no wetted steel components. Standard pressure rating is 150psi with optional 250psi available

Main Features of the FRP Multi Cartridge Filter Housing

Body Constructed of FRP higher tensile strength and broader chemical resistance than SS
No Wetted Steel Parts - longer vessel life, especially in desalination and other high corrosion applications
Easier Handling, Lower Installation Cost, separate top/bottom closure system, faster cartridge access and change-out
Standard Design Features separate dirty/clean water drain ports, top vent connection, side in/out connections
IPS Groove In/Out Connection - Standard groove-to-groove couplings available
ASME Section X designed and tested in accordance
5, 12, 22 round X 20", 30" 40". 60 round X 40", 50", 60", 70"

Vontron® Membrane Elements are the world standard for membrane research and development and high quality components for the reverse osmosis industry. For technical information and local stock availability of Vontron® membranes please contact the Australian distributor Hydropure Australasia: more...

*NEW*

ECH-FRP Multi Element

Filter Cartridge Housing

_____________

*NEW*

Reverse Osmosis System

and Conductivity Controller

Pre-filtration is critical in any membrane separation system. There are many forms of pre-filtration available for these applications, although most are not well matched to the particular feed water system requirements. It is important to establish the exact characteristics for pre-filtration housing selection for flow rate and corrosion resistance during the development of any installation. PRODUCTS

Australian Distributor

Representative Office